Ivoclar-vivadent IvoBase Injector v.2 Manuel d'utilisateur

Operating Instructions IvoBase® InjectorValid as of Software Version 1.1

103. Product Description3.1 Components The IvoBase Injector comprises the following components:– Basic injector with polymerization chamber and oper

4.1 Unpacking and checking the contentsThe packaging provides the following advantages:– Reusable packaging– Closing mechanism with integrated tra

12Connect the USB download cable.If required, e.g. for software updates, connect the injector with a laptop/PC using the USB cable (101) and the respe

134.5 Initial start-up1. Connect the power cord (13) with the wall socket.2. Put the On/Off switch (20) on position "I".Immediately aft

145. Operation and Configuration 5.1 Introduction to the operationThe IvoBase Injector is equipped with a graphic display with back-lighting. The in

155.4 Settings and informationBy pressing the "Settings" key (71) you can access the settings screen (the latest selected settings will b

16SettingsIndication on displayShort descriptionDate of the latest calibrationSupply voltageShows the current supply voltage.List of errors5.5 Expl

6. Practical Use6.1 Switching on the injectorPut the On/Off switch (20) on position "I". The injector now con-ducts an automatic self-test.

If the safety door is opened while an injection pro-gram is running, the program is stopped for safety reasons. While the program is interrupted, th

197. Maintenance, Cleaning, DiagnosisThis chapter describes the user maintenance and cleaning proce-dures for the IvoBase Injector. Only those tasks a

2List of parts 3 1. Introduction / Signs and Symbols 61.1 Preface1.2 Introduction1.3 Notes regarding the Operating Instructions1.4 Note on

20Step 2: Unplug the cable for the OSD. Step 3: Unplug the heater plug. Step 4: Unplug the plug with the label "heater". Step 5: Remove th

21Step 5: Remove the sensor. Dismounted sensor: Mounting the temperature sensor:Mounting the temperature sensor is carried out in the same way as

22Step 9: Analyze the measurement. The measuring results must be in the following temperature range:– Min.: 90 °C / 194 °F– Max.: 110 °C / 230 °FIf

238. What if...?This chapter will help you to recognize malfunctions and take appropriate measures.8.1 Error messagesDuring operation, the injector

248.2 Resin leaks from the flaskUnder certain circumstances – e.g. if the filter component was for-gotten to be placed in the flask (see Instruction

258.4 Technical malfunctionsThese malfunctions may occur without an error message being displayed:Error Double-check MeasureDisplay incomplete Con

269. Product Specifications9.1 Delivery form– IvoBase Injector– Power cord– USB download cable– 2 Sets of flasks – Thermal glove– Temperature

2710. Appendix10.1 Program structureProgram No. Name Description Duration1 IvoBase HybridProgram for the polymerization of the IvoBase Hybrid mater

Ivoclar Vivadent AGBendererstrasse 2FL-9494 SchaanLiechtensteinTel. +423 235 35 35Fax +423 235 33 60www.ivoclarvivadent.comIvoclar Vivadent Pty. Ltd.

3List of PartsInjector:1 Temperature sensor2 Heater3 Warnings4 Operating Status Display (OSD)5 Warning light6 Clasps7 Door handle8 Polym

4Flask:40 Isolating shoulder 41 Centering peg42 Flask lid 43 Flask housing 44 Locking clasp attachment61 Access former half 62 Access f

5Operating panel71 Settings key72 Information key73 Right cursor key74 Left cursor key75 Program 2 key76 Program 1 key77 RMR key78 – key79 +

61. Introduction / Signs and Symbols1.1 PrefaceDear CustomerThank you for having purchased the IvoBase Injector. It is a modern injection device for

72. Safety First This chapter is especially important for individuals who work with the IvoBase Injector or who have to carry out maintenance or repa

82.1.5 Contraindication The hood may only be removed while the injector is switched off and the power plug disconnect-ed.2.1.6 Contraindication

92.2 Health and safety instructionsThis injector has been designed according to EN 61010-1 and has been shipped from the manufacturer in excellent c